Author Topic: Embedding in your own Webpage (Google Gadget)  (Read 38304 times)

Offline kg6ypi

  • Administrator
  • Remote Master
  • *****
  • Posts: 1332
    • RemoteHams.com

Offline aurele

  • Remote Enthusiast
  • ***
  • Posts: 79
    • Javaradiofrance
Re: Embedding in your own Webpage (Google Gadget)
« Reply #16 on: October 28, 2013, 10:47:03 am »
Unréal média server

Offline f1nni

  • Remote Enthusiast
  • ***
  • Posts: 16
Re: Embedding in your own Webpage (Google Gadget)
« Reply #17 on: October 28, 2013, 01:13:41 pm »
tnx for answer,
for the time not running well here,,i'll see that tomorow, can't run server well.
i don't have the same screen, i think i don't have the same prg file.

73 rémi

Offline m3ghe

  • Moderator
  • Remote Master
  • *****
  • Posts: 757
    • Barney's online radios
Re: Embedding in your own Webpage (Google Gadget)
« Reply #18 on: November 10, 2013, 12:33:19 am »
hello barney...
tnx for answer.
i think i use the good code.
but we have only few seconds to put login and passwd,and after disconnected from remote...it's the same on your link.
on a smartphone it's not so easy to put login and passwd in few seconds.

73

rémi

Remi is absolutely correct there is no way to get the username and password into the boxes before it times out. It seems to have got worse, is there any way to increase the time to input? I looked at an example swfobject.js but couldn't figure it.

Barney

Offline kg6ypi

  • Administrator
  • Remote Master
  • *****
  • Posts: 1332
    • RemoteHams.com
Re: Embedding in your own Webpage (Google Gadget)
« Reply #19 on: November 10, 2013, 11:12:38 am »
The timeout is a 5 second timeout, controlled by RCForb Server itself.   For a work-around; you can disable this timeout by "allowing guests" to connect.

In RCForb Server, go to Option -> Server Configuration,  un-check "Guests Not Allowed".

On a side note, it appears google may be getting rid of their Google Gadget service.  iGoogle has been terminated, and Google Gadgets were developed for this reason.  I suspect Google Gadgets will soon follow...
« Last Edit: November 10, 2013, 11:15:17 am by kg6ypi »

Offline m3ghe

  • Moderator
  • Remote Master
  • *****
  • Posts: 757
    • Barney's online radios
Re: Embedding in your own Webpage (Google Gadget)
« Reply #20 on: November 11, 2013, 06:21:18 am »
Yeah that did it. I had realised that google gadget may go so I'm starting to convert my html pages back to how they were before the gadget. I have all the files needed on my own server.
You caught me out with the switching Unicode off in the latest build of RCForb but a quick change from true to false in the script fixed that. See I have been paying attention these last few years it only took me 10 minutes to realise what had happened and to correct it!  :D

Barney 
« Last Edit: November 11, 2013, 06:51:35 am by barney »

Offline kg6ypi

  • Administrator
  • Remote Master
  • *****
  • Posts: 1332
    • RemoteHams.com
Re: Embedding in your own Webpage (Google Gadget)
« Reply #21 on: November 11, 2013, 09:13:52 am »
Unicode (UTF16) mode has been deprecated.  The old ASCII mode has been upgraded to UTF8.  This allows us to support all the special characters while be backword compatible with older clients along with support for web browsers.

If you connect to your remote  via the browser you will see JSON formatted data sent back to you.  This data will be used on the new map layout (work-in-progress).

Example, my K3....
http://kg6ypi.dyndns.org:3001/
« Last Edit: November 11, 2013, 09:30:13 am by kg6ypi »

vk3jed

  • Guest
Re: Embedding in your own Webpage (Google Gadget)
« Reply #22 on: November 19, 2013, 07:32:33 pm »
Playing with this, seems to work well, except contrary to what some posts indicate, it seems to use Flash (Firefox on the Mac indicated Flash is loading), so the gadget doesn't work on the iPhone. :(  A non Flash solution that can also handle audio would be the solution for me.

Offline f1nni

  • Remote Enthusiast
  • ***
  • Posts: 16
Re: Embedding in your own Webpage (Google Gadget)
« Reply #23 on: January 18, 2014, 06:41:05 am »
Hello all.
when i go on remotehams web site at full screen map, i can see all remote stations..
why some like HB9EKK have direct remote transceiver online and some like mine (or onother) not have the same screen..??

how have it?
tnx
f1nni rémi





Offline kg6ypi

  • Administrator
  • Remote Master
  • *****
  • Posts: 1332
    • RemoteHams.com
Re: Embedding in your own Webpage (Google Gadget)
« Reply #24 on: January 18, 2014, 04:01:44 pm »
You must setup third party audio solution for streaming audio into the web browser,  then your remote will be "controllable" thru the web browser. If not,  RCForb Client must be used.

Offline f1nni

  • Remote Enthusiast
  • ***
  • Posts: 16
Re: Embedding in your own Webpage (Google Gadget)
« Reply #25 on: January 20, 2014, 12:24:10 pm »
hello,
tnx for answer Brandon.
for the time, i think there is too much lost time via third party.
user can't use correctly the remote.
if only rx, run well, but if tx, too much delay....or my computer is so bad.... :o
i see 10s delay...not sure about this time.
i'll test another time and see.


73
f1nni rémi

Offline kg6ypi

  • Administrator
  • Remote Master
  • *****
  • Posts: 1332
    • RemoteHams.com
Re: Embedding in your own Webpage (Google Gadget)
« Reply #26 on: January 20, 2014, 12:35:52 pm »
Embedding in a browser has never supported TX specially with streaming audio servers.  This is why RCForb Client/Server was developed, to support real-time RX/TX audio.  If you must,  Skype can be used for RX/TX and a "call" button will be embedded into the "webpage" displaying the remote.

dg8yhh

  • Guest
Re: Embedding in your own Webpage (Google Gadget)
« Reply #27 on: February 03, 2014, 04:09:50 am »
Hello together,

can anybody help me configure the audiostream ?
If´ve Installed Funcube Pro Plus with SDR-Console V2 . With the Client it works fine.

Now I want to control the RX via Webinterface , but I can´t get the audio streamed to the Player

I installed unreal live server and mediaserver like Brandons example , opened the port 5119 on the route TCP and UDP

There is no stream of my audio. If I change to other servers everthing works , but´s not my audio :-(

Website is www.dg8yhh.de

What did a make wrong ? can anybody help me ?

73 and Best regards
Alfons DG8YHH

Offline kg6ypi

  • Administrator
  • Remote Master
  • *****
  • Posts: 1332
    • RemoteHams.com
Re: Embedding in your own Webpage (Google Gadget)
« Reply #28 on: February 03, 2014, 09:06:52 am »
I looked at your page, the source code appears correct.  You may need to open "Windows Firewall".  Add port 5119 as an exception to Windows Firewall.  This may be the problem.

dg8yhh

  • Guest
Re: Embedding in your own Webpage (Google Gadget)
« Reply #29 on: February 03, 2014, 09:45:51 am »
Hi Brandon ,

Thanks for your help . That it was !!

Opened port 5119 at the Windows-Firewall an now audio work.  ;D


mny tnx

de Alfons