Author Topic: N1MM+ and CW keying with RCforb client and server  (Read 62 times)

Offline ve3jaq

  • Just starting...
  • *
  • Posts: 7
N1MM+ and CW keying with RCforb client and server
« on: June 14, 2018, 07:48:37 am »
I have N1MM+ working with Remote setup but I would like to get the CW keying working.  I am not currently using external keyer or ORB control box but keying directly from N1MM+ .   I have tried to configure the server using the virtual com port ( works) with and without external keying.  When I try to send cw from N1MM+  the transmitter on the K3 keys up and tone is sent but no CW.  The tone is unkeyed by hitting esc while in N1MM+ 
Any help?  I have checked the forum on this topic but have not been able to find the solution. 

Thanks,
Dennis


Offline ve3jaq

  • Just starting...
  • *
  • Posts: 7
Re: N1MM+ and CW keying with RCforb client and server
« Reply #2 on: June 15, 2018, 07:25:50 am »
Everything works!  So Cool!  Gonna try this out from from the backyard full test.