Author Topic: Problems with TS2000 and SsignaLink Usb  (Read 67 times)

Offline kd5jzn

  • Just starting...
  • *
  • Posts: 1
Problems with TS2000 and SsignaLink Usb
« on: May 14, 2018, 07:00:04 pm »
I was wondering if anyone could assist me in getting my remote set up.
I'm having issues getting it all to work any time i try to connect I get the following error report:
Warning: error parsing IF: command results.
Any valid comments  or help would be appreciated

Online w8rj

  • Moderator
  • Remote Master
  • *****
  • Posts: 2459
Re: Problems with TS2000 and SsignaLink Usb
« Reply #1 on: May 15, 2018, 03:29:18 am »
First with the Signalink read this post:,2768.0.html

The error you are seeing isn't related to the Signalink but something with the serial port. Make sure you have the baud rate correct in the Radio Connection setup. Also make sure you don't have RTS or DTR checked in Radio Connection. 

Confirm you have the PTT&Cw set as outlined in the post about the Signalink

If you're using Windows 7 or later, make sure your USB to Serial adapater is not a Prolific chipset. They are notoriouslly un-reliable
« Last Edit: May 15, 2018, 03:44:38 am by w8rj »