Author Topic: Denkovi USB 16 Channel Relay Switch  (Read 166 times)

Offline wa5vhu

  • Just starting...
  • *
  • Posts: 2
Denkovi USB 16 Channel Relay Switch
« on: May 06, 2018, 03:33:34 pm »
I have a Denkovi USB 16 Channel Relay Module - RS232 Controlled board and tried all the available switch selections just in case one of them would work unfortunately none did.

Any interest in incorporating this switch into the program?

The info is here: https://denkovi.com/usb-16-channel-relay-module-rs232-controlled-12v-ver.2


Thanks & 73,
Charles

Offline w8rj

  • Support Tech
  • Remote Master
  • ****
  • Posts: 2409
Re: Denkovi USB 16 Channel Relay Switch
« Reply #1 on: May 06, 2018, 04:47:40 pm »
I'll see what I can do. Switches are pretty easy.

I'll let you know when it's done.
73
Roger
W8RJ

Offline wa5vhu

  • Just starting...
  • *
  • Posts: 2
Re: Denkovi USB 16 Channel Relay Switch
« Reply #2 on: May 06, 2018, 04:49:39 pm »
Great, thanks!!!    ;D

Offline w8rj

  • Support Tech
  • Remote Master
  • ****
  • Posts: 2409
Re: Denkovi USB 16 Channel Relay Switch
« Reply #3 on: May 12, 2018, 02:28:31 pm »
Try this installer. The Denkovi has been incorporated.

http://download.remotehams.com/debug/RCForb_Server_Setup_0.7.exe

Since there are 16 switches I made the first 8 "mutually exclusive", that is on the first 8, only one can be closed at a time and if none are closed, switch one will be closed. Perfect for antenna switching. The last 8 can be set any way you want.

If it doesn't work let me know and we'll get it working.
73
Roger
W8RJ