Author Topic: PTT IC-7200  (Read 378 times)

Offline sa6bqz

  • Just starting...
  • *
  • Posts: 2
PTT IC-7200
« on: February 15, 2018, 05:53:18 am »
Hi,
New to this forum  ;D
I have a small problem that I cannot find a solution to.
I have installed the server and the client and everything works: frequency setting, changing from USB to LSB, tuning and so on but PTT does not work.
The client goes into PTT but the radio does not.
If I tune the radio, IC-7200, tunes perfect.
What am i doing wrong?
73 de SA6BQZ Gunnar
 

Offline w8rj

  • Moderator
  • Remote Master
  • *****
  • Posts: 2353
Re: PTT IC-7200
« Reply #1 on: February 15, 2018, 06:44:33 am »
I assume you're using the USB to Serial port and Audio interface on the radio.

Confirm you have PTT "via Cat"  (Options->Radio Configuration->PTT & CW)

You should be using the TXd button for transmit, that takes care of enabling the USB audio to the radio.
http://www.remotehams.com/forums/index.php/topic,1248.0.html

Also look at this post:
http://www.remotehams.com/forums/index.php/topic,402.0.html
73
Roger
W8RJ

Offline sa6bqz

  • Just starting...
  • *
  • Posts: 2
Re: PTT IC-7200
« Reply #2 on: February 15, 2018, 07:29:51 am »
Thanks Roger, that made the trick now it is working 100%
I am running a Winlink node, SK6PS, normally on the IC-7200 but it is nice to use it for SSB also.
73 de SA6BQZ Gunnar