Author Topic: IC-7300 USB MOD input constantly resetting  (Read 656 times)

Offline pd5dj

  • Just starting...
  • *
  • Posts: 3
IC-7300 USB MOD input constantly resetting
« on: February 10, 2018, 07:38:15 am »
Hi All

I have setup Server/client and android part.

All is working well only one thing is keeping giving me problems with the audio.

As the audio is coming via the USB port,

I have set the following in the menu: MENU>SET>Connectors>DATA OFF MOD>MIC,USB (or USB only)

Now when every time a client does a PTT, this parameter will reset from whatever it is set to MIC again.

Any ideas?

Offline w8rj

  • Moderator
  • Remote Master
  • *****
  • Posts: 2363
Re: IC-7300 USB MOD input constantly resetting
« Reply #1 on: February 10, 2018, 07:40:47 am »
If you're using the TXd button which you should be using, it's designed that way. When going to TX the transmit audio input is switched to the USB interface and going back to receive the front microphone is switched back.

http://www.remotehams.com/forums/index.php/topic,1248.0.html
73
Roger
W8RJ

Offline pd5dj

  • Just starting...
  • *
  • Posts: 3
Re: IC-7300 USB MOD input constantly resetting
« Reply #2 on: February 10, 2018, 08:28:11 am »
Hi

Thanks for pointing me out, I have looked over that many times  ???

I made some screenshots of the server side.

Step 1 Also see the picture step-1.png
Click "Options" then click "Security Manager"


Step 2 Also see the picture step-2.png
Look for "Allowed Buttons" and Click "Get List"
This will put all the available buttons inline, seperated by a ","


Step 3 Also see the picture step-3.png
You will see the following 2 TX buttons: "TX" and "Txd"
Now delete the Button "TX"including the "," like "TX,"
Press "SAVE" and you are done :-)



« Last Edit: February 10, 2018, 08:29:51 am by pd5dj »

Offline w8rj

  • Moderator
  • Remote Master
  • *****
  • Posts: 2363
Re: IC-7300 USB MOD input constantly resetting
« Reply #3 on: February 10, 2018, 09:09:50 am »
If you had clicked the button with 3 dots, you would have a presentation of the controls displayed and not displayed. Attachment is K3 controls on my remote.

After changing the controls, the Client needs to be re-connected.

73
Roger
W8RJ

Offline pd5dj

  • Just starting...
  • *
  • Posts: 3
Re: IC-7300 USB MOD input constantly resetting
« Reply #4 on: February 10, 2018, 09:12:07 am »
Thanks for this addon to this topic.

Visuals sometimes make it more clear then only text for some people.