Author Topic: CW transmit/decode  (Read 1173 times)

Offline m0pkz

  • Remote Enthusiast
  • ***
  • Posts: 48
    • M0PKZ blog
CW transmit/decode
« on: February 02, 2018, 01:00:46 am »
Hi,

1. When I trying send the script getting error message: Remote information. Message [CW] is not allowed.

2. Is the decode section should work and decode the message? As tried few cw stations but the app not decoding at all.

The phone samsung galaxy s6 edge plus.

Regards, Kes-m0pkz

Offline w8rj

  • Support Tech
  • Remote Master
  • ****
  • Posts: 2409
Re: CW transmit/decode
« Reply #1 on: February 02, 2018, 03:43:24 am »
First thing for CW is the remote needs to be CW capable. If you see a CW Message box on the remote it should be CW ready.

To make your 7300 CW capable you will need a serial port and use the RTS or DTR line to open and close a open collector switch to open and close the CW key on your radio. Here is a inexpensive ready made cable. Make you the radio knows there is a "straight" key connected.

http://www.newegg.com/Product/Product.aspx?Item=9SIA3XT1D87045

As to CW decoding the remote radio needs to be capable of decoding CW. The only one I know of is the K3 and it also needs to be setup on the radio.
73
Roger
W8RJ

Offline m0pkz

  • Remote Enthusiast
  • ***
  • Posts: 48
    • M0PKZ blog
Re: CW transmit/decode
« Reply #2 on: February 02, 2018, 09:28:14 am »
Tnx it's working now. I had ts-590sg and it's supports cw decoding...would it work with this app?

Regards, Kes.

Offline w8rj

  • Support Tech
  • Remote Master
  • ****
  • Posts: 2409
Re: CW transmit/decode
« Reply #3 on: February 02, 2018, 09:43:19 am »
The Kenwood 590 driver was never updated to support CW decoding. Let me look into it.
73
Roger
W8RJ

Offline w8rj

  • Support Tech
  • Remote Master
  • ****
  • Posts: 2409
Re: CW transmit/decode
« Reply #4 on: February 02, 2018, 11:17:24 am »
If you have a 590SG I would like to test the driver on your radio.

Private message me with your TeamViewer Credentials so I can remote in to test.
73
Roger
W8RJ

Offline m0pkz

  • Remote Enthusiast
  • ***
  • Posts: 48
    • M0PKZ blog
Re: CW transmit/decode
« Reply #5 on: February 19, 2018, 08:11:13 am »
sorry but no...had one...now ic-7300

Offline ea4goy

  • Just starting...
  • *
  • Posts: 2
Re: CW transmit/decode
« Reply #6 on: April 06, 2018, 05:36:18 am »
Hola.
Tengo una FTDX-3000 y decodifica CW, se podría usar con la aplicación??

Offline w8rj

  • Support Tech
  • Remote Master
  • ****
  • Posts: 2409
Re: CW transmit/decode
« Reply #7 on: April 06, 2018, 07:17:55 am »
There are no computer commands for the FTDX-3000 to get decoded CW

Google translate:
No hay comandos de computadora para que el FTDX-3000 se decodifique CW
73
Roger
W8RJ