Author Topic: Raspy Distorted CW Signals  (Read 714 times)

Online k9xv

  • Remote Enthusiast
  • ***
  • Posts: 16
Raspy Distorted CW Signals
« on: June 07, 2017, 03:32:38 pm »
Hi All,

We are experimenting with a FLEX 6500  on Remotehams.  The control seems to work great and we are happy with the results.  The issue we are having has to do with Receive Audio.  The RX audio is coming from DAX Audio RX1 channel of the DAX control software.  We have connected the FLEX and listen to the audio and the CW sounds raspy (slightly distorted).  I have adjusted audio levels and such and the raspy still persists.

We connect via Teamviewer codec and the audio sounds great and very natural. (No clipping) and the raspy nature goes away. 

Any suggestions?? 

Tom K9XV
Tom - K9XV

Offline w8rj

  • Moderator
  • Remote Master
  • *****
  • Posts: 2003
Re: Raspy Distorted CW Signals
« Reply #1 on: June 08, 2017, 04:35:51 am »
I could not find your remote, so I couldn't listen. But I did listen to a couple of other Flex-6XXX remotes and they sounded fine.

Do you hear the raspy CW audio on other Flex remotes or just yours?

It would be helpful to publish your remote and give me enough privileges to listen myself.
73
Roger
W8RJ

Online k9xv

  • Remote Enthusiast
  • ***
  • Posts: 16
Re: Raspy Distorted CW Signals
« Reply #2 on: June 09, 2017, 01:55:22 am »
Thanks for the reply Roger.  We are running the VHF Contest this weekend and I will bring the FLEX back online after the contest.

Tom K9XV (W9VW)
Tom - K9XV